Send Message

Easy Programme 5/17 Key Dini Argeo Weight Indicator For Table / Column

Basic Information
Detail Information
Dimensions In Mm: 243x145x78,4 Mm Keyword: 5/17 Key Dini Argeo Weight Indicator
Photomosfet Outputs: 150 MA 48 Vac / 150 MA 60 Vdc(NO) Feature: 4 Channels, Up To 200 Conv./sec
Analogue Output: 4-20mA / 0-5Vdc / 0-10Vdc Built-in Battery: 230V
High Light:

5/17 Key Dini Argeo Weight Indicator


Easy Programme Weight Indicator

Product Description

Easy to programme 5/17 Key dini argeo weight indicator for table, column

The wide range of available functions and interfaces, make it suitable for multiple industrial and commercial weighing applications, such as floor scales, mobile weighing, etc.
We have different types of weigh indicator, depend on the extend function there are Basic version, Pro version and Ex-version for explosion and flammable environment.
We even have some digital weighing indicators are specially used for industrial control of quantitative feeding, material
reduction and batching control. With analog voltage and current output function, using 16-bit D / A converter, with RS232 / RS485 serial communication interface, large screen interface, relay output interface, aluminum alloy shell, can be easily embedded in the control cabinet, and all the above interfaces In addition to electrical isolation, multiple control methods (such as feed control, reduction control, 4 material batching, etc.) are applicable to industries such as cement, chemical industry and metallurgy.
5/17-key functional waterproof keypad, with indication for quick access to main functions and regulations.
LCD 25mm backlit display with 6 high contrast digits and icons for indication of active functions.
Waterproof IP68 STAINLESS STEEL case, with sealed rubber gasket, easy to clean and resistant in harsh and corrosive environments.
Dimensions in mm: 243x145x78,4 mm.
Suitable for use on the table, column, or wall.
A/D 24 bit converter, 4 channels, up to 200 conv./sec. autoselect and up to 8 signal linearisation points.
Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
Up to 1.000.000 displayable divisions with built-in resolution up to 3.000.000 points.
Connection with up to 8 load cells with input resistance equal to 350 Ohm or up to 16 cells of 700 Ohm each.
Digital calibration and set-up from keypad or from PC with DINITOOLS.
Power supply 110-240 Vac.
RS232/C port configurable for connection with printer/labeller, or for attached printer.
RS232/C (or optionally RS485) bi-directional port configurable for PC, PLC, remote display, and radio modem.
Quick RJ RS232 plug connection.
Zeroing, Automatic tare, Presettable tare, printing and/or data transmission, selectable function command, on/off switching, backlit setting, function mode quick selection, user menu.
Specific program (MSTSLV code) for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.
Multi-scale repeater (MASTER):
function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.
UNIVERSAL weight repeater:
function which allows to repeat the weight of any scales, through the configuration of the input string.
Radiofrequency 6-key remote control: zero, tare, enable / disable function, print, switch-off.
The user can select the operating modes directly using the dedicated key*:
- High resolution display x 10
- Precision weighing with temporary recalibration via a sample weight (for internal factory use)
- Net/Gross
- Newton to Kg converter
- Lb to Kg converter
- Free conversion factor (for meter and litre counters etc.)
- Weight totalizer
- Formulizer
- +/- controller with quick target and threshold input
- Percentage weighing
- Percentage batching with programmable target
- Piece counter
- Hold
- Two-speed filling/batching with reset upon starting (with optional DFIO)
The “alibi memory” and “setpoint” functions are available in combination with the required operating mode and they are activated automatically when installing the relevant optional board.
Optional functions:
- PEAK, detection of weight peaks (code DFWPK)
- Newton to Kg converter (code DFWPK)
Access to the user menu is gained using the dedicated key* to adjust the weighing filter, date and time, setpoint and tare weight, which the user can access by entering a programmable access password.
* These quick access keys to the menus can be blocked by configuring a dedicated password.
EU Type Examination Certificate (45501:2015)

Contact Details

Phone Number : +8613860494658

WhatsApp : +8613860494658